Ana Sayfa · Şirket Hakkında · Döküman İndir · Sipariş Formu · Bize Ulaşın

İthalat Ürünlerimiz

BTM
Saç Kenetleme Çözümleri

Arnold & Shinjo
Çakma Somun Sistemi

Typrama
Markalama Kalıp ve Ekipmanları

Numbering Embossing Tools

Double Embossing Tools

Rolling Embossing Tools

Numbering Tools

Plate Embossing Tools

Dies, Type Holders, Types

Marking Machine

Embossing Presses & Plants

Heated Embossing Tools

Np
Self Clinching Fasteners

İmalat Ürünlerimiz

dkPOWER
Hidropnömatik Silindir

dkHYDRAULIC CYLINDER
Hidrolik Silindir

dkPOWER CYLINDER
Pnömatik Silindir

dkBOOSTER
Buster

dkSPECIAL BOOSTER
Özel Buster

dkWELDING BOOSTER
Kaynak Busteri

dkREZERVOIR
Rezerv

dkPOWER PRESS
Pres

dkSPEED
Hassas Hız Kontrol Silindiri

Özel

Typrama - Markalama Kalıp ve Ekipmanları - Embossing Presses and Plants

Handhebelpresse (HK500 - HK2500)
Hand lever presses of the series HK are suitable for pressing, embossing, riveting and punching. The spindle guiding has been hardened and grinded. An optimum pressure capacity is reached by the long spindle guiding. The table has-slot according to DIN 650.

All presses have a vertical adjustment in order to adjust the strongest point of pressure exactly to the required height. The return of the hand lever ensues via spring tension.

Typ

HK 500

HK 800

HK 1500

HK 2500

Druckkraft kp

500

800

1500

2500

Verstellbare Arbeitshöhe mm

45-140

45-230

50-170

55-240

Spindelbohrung mm

10H7

10H7

10H7

10H7

Ausladung mm

63

80

100

100

Tischfläche

100x60

160x108

170x140

185x140

Höhe des Ständers mm

290

410

400

460

Grundfläche

110x160

160x220

170x300

185x300

Gewicht kg

8,7

20,5

32,0

42,0

Fedderschlagpresse (FP11 - FP25)
Spring impact presses reach with minimum power input comparatively strong impact effects. The impact power of the press is infinitely adjustable. A great tolerance range of the parts to be treated can be by-passed, as the power can be used effectively over the whole stroke length. In addition to that, the working height of the press can be adjusted over wide ranges (long column). The adaptation of the tools ensues by means of collets. The table has two T-slots.

The presses are also available as pneumatic design. On same a pneumatic cylinder releases the stroke movement and this; the spring tension is exceeded up to the impact release. The hand lever is only mounted, in this case, for setting-up the machine.

Typ

FP 11

FP18

FP30

Schlagleistung kN

3

20

45

Säulenhöhe mm

455

650

950

Tischfläche mm

100x100

160x160

220x220

Ausladung mm

95

130

180

Max. Arbeitshöhe mm

270

350

450

Gewicht kg

11

36

113

Werkzeugaufnahme

6x25

10x45

16x45

Gewicht kg

210x125x550

310x190x830

440x260x1260

Pneumatik - Pressen (PND300 - PND1300)
Presses of the series PND work with double-acting cylinders. Pressure from 300 to 1300 kp are available. The spindles are hardened and grinded. The table of the press has a T-slot according to DIN 650. All types have an adjustable working height with screw. The working height can be quickly adjusted by means of the spindle. Additionally the piston rod has a clamping setting ring. This, stroke may be limeted and fine adjustment can be made. The piston rod of the cylinder is locked against torsion.

Typ

PND 300

PND450

PND 900

PND 1300

Stroke /mm

40

40

40

40

Throat distance

60-250

80-215

80-215

110-300

Working height /mm

78

100

100

130

Table area

160x110

170x140

170x140

200x190

Spindle adaption

12

12

12

16

Base area /mm

120x160

170x290

170x290

200x375

Weight /kg 

18,5

32

35

45

Air connection

1/4"

1/4"

1/4"

1/4"

Pneumatik - Pressen (PND10 - PND60)
Pneumatik toggle plate presses of the series PNK with pressure capacities from 10 kN up to 60 kN. The spindles and toggle levers of this press are also hardened and grinded. By transmission ratio of the toggle lever are reached relative high pressures with small cylinder diameters. As a result, the air required can be reduced considerably in comparison with pressure capacities generated only by pneumatics. The spindle is locked against torsion and the stroke can be limited. Indeed, the pressure is only reached with toggle lever to be drawn out. The working height canbe adjusted by means of a screw. The table of the press has slots according to DIN 650.

Typ

PND 10

PND 26

PND 32

PND 60

Pressure  6bar

10 kN

26 kN

32 kN

60 kN

Stroke

40

40

40

40

Working height

45-145

65-240

85-240

90-290

Spindle hole 

12

12

12

20

Throat distance /mm 

100

130

130

150

Table area mm

185x145

200x190

200x190

300x210

Base Area / mm

185x300

200x375

200x375

300x450

Weight / kg

38

80

80

135

Pragepresse (CP518)
Low-energy quick stroke operated by air, linear power run in all stroke sections, automatic power stroke in every positioning of the quick stroke after putting on the workpiece, air reductions as against normal compressed air presses up to 90%, numbers of stroke up to 160 strokes/min, oil/air separation, long-live sealings, big oil supply for long refilling intervalves, careful treatment of the tool and noise reduction by little impact forces.

Modell
Stroke
Power-stroke
Power /10 bar
Power /6 bar

The presses with hydraulic cylinders are not listed. Regarding the pressure capacity and the stroke lenght no restrictions in the design exist for these types. Cylinders according to the requirement may be used.

Special design stroke up to 200mm, power stroke up to 24mm available

CONTROL UNITS
S1 Push button/Hand lever S2 Two-hand release
S3 External impulse (electric/pneumatic)
S4 Protective grating manually operated. The forward stroke is ensued by means of push button/protective grating; the backward stroke is ensued by loosening the push button/protective grating.
SA1 Two-hand with single-continous stroke, backward stroke automatically via time element (only in connection with protective coating) SA2 Stop releasing with automatic backward stroke and strong protective coating.
SA3 Automatic protective coating with release via external impulse or stop release.
SA4 Programming control for the press with 3-6 additional pneumatic cylinders, with panel for single/continuous stroke, emergency shut-down.

Pragepresse in 2 - Saulen - Standerausführung (SP517)
Column presses of type SP 517 are supplied in two-column or four-column design.
A robust panel construction with welded stiffenings ensures a minimum bend of the press. The pressure input is ensued by two or four colums. This design can be easely modified according to the application, as on the size are hardly imposed limits. With this press you can also choose between pneumo-hydraluic and hydraulik compression cylinder.

Presse

Weg mm

Krafthub mm

Druck / 10 bar

6 bar

T10

32

6

10 kN

6 kN

T20

32

6

20 kN

12 kN

T40

32

6

40 kN

24 kN

T80

32

6

80 kN

40 kN

T150

32

6

150 kN

90 kN

T300

32

6

300 kN

180 kN

T500

32

6

500 kN

300 kN


As standart equipment of the pneumo-hydraulic press we deliver maintance unit with pressure reducer, lubricator, filter, foot starting and control valve.

Abrollpragemaschinen (AM40 / 73H / 73EL / 76EL)
Rolling embossing machines for embossing of round materials. Hollow and solid works can be embossed. The pressure necessary for embossing can be small according to the penetration depth. As a result, embossing into relative thin-walled tubes are also possible without deformation. The machine to be made of solid castings has a table with flexible springs for tolerance adjusting and for tool protection. Bogies mounted on the table are used for holding-up and for adaption of parts.
The embossing tool is mounted into an embossing slide and runs with every embossing horizontally across the workpiece. The adaptation of the diameters of parts and the depth of embossing are adjusted via working table with adjustable height. Using suitable tools with these machines flat materials can also be embossed.
With cylindrical parts type holders with single-block types or numbering embossing mechanisms can be used as tools. With flat parts can be used embossing rolls or barrel-shaped rolling embossing mechanisms.
The bogies serving as holding-up are delivered with rigid design for different diameters of parts. With diameters from 20mm can be utelized an adjustable equipment. Special-purpose adaptors with needle bearing rolling pins for thin-walled hollow parts are available, too.

AM40
Small hand rolling machine with adjustable passage height on the embossing head. According to the used embossing tool only suitable for little diameters of workpiece.

AM73H
Manually operated rolling machine with solid castings. Passage of work piece approx. 120mm (with application of type holders as embossing tool). The adoption of the tools is made by means of quick-change equipment.

AM73EL
Same size as the design AM 73 H, but with embossing slide operated by motor.

AM76EL
Biggest machine with max. 500mm distance between tables and embossing slide. Slide driving by motor.
As standard equipment of electric machines we supply a control unit with functions for adjustment, single-continuous stroke and two-hand release.

dkPOWER - dk Otomasyon Sistemleri ve Makine Sanayi ve Ticaret Limited Şirketi
1995 - 2017